6DJ8 Tube Headphone Amp
Amplifikatörler, Amfi Modelleri ve fiyatları, en iyi amfi, high end amfilikatör
![]() |
6DJ8 (ECC88) Valve Headphone Amplifier – Inside |
![]() |
6DJ8 (ECC88) Tube Headphone Amplifier – Finished |
The frequency response at the 50 mW level is from 20 Hz to 28 kHz within 0.5 dB and the wide band signal-to-noise is at -84 dB. Power consumption of the headphone amplifier is approximately 20 Watts (W). Bruce reports excellent results with his Koss Pro4AAT (250 ohms) and Sennheiser HD-280 PRO (64 ohms) headphones. “there was no audible noise or hum and the response was rich and clean” For full project details, see the DIY 6DJ8 (ECC88) Tube Hi-Fi Headphone Amplifier Project page.
More DIY Headphone Amplifier Projects:
- IRF610 MOSFET Class-A Headphone Amplifier
- DIY CMoy (Grado RA-1 clone) Headphone Amplifier
- 12AU7 (ECC82) Tube / IRF510 MOSFET Headphone Amp
Amplifikatörler, Amfi Modelleri ve fiyatları, en iyi amfi, high end amfilikatör
diyaudioprojects
![]() |
6DJ8 (ECC88) Valve Headphone Amplifier – Inside |
![]() |
6DJ8 (ECC88) Tube Headphone Amplifier – Finished |
The frequency response at the 50 mW level is from 20 Hz to 28 kHz within 0.5 dB and the wide band signal-to-noise is at -84 dB. Power consumption of the headphone amplifier is approximately 20 Watts (W). Bruce reports excellent results with his Koss Pro4AAT (250 ohms) and Sennheiser HD-280 PRO (64 ohms) headphones. “there was no audible noise or hum and the response was rich and clean” For full project details, see the DIY 6DJ8 (ECC88) Tube Hi-Fi Headphone Amplifier Project page.
More DIY Headphone Amplifier Projects: